Stainless Steel Facilities

Stainless Steel Cold Finishing

Aamor Inox's cold-finishing facility is regarded as one of the most advanced Bars finishing facility in India. It can process upto 60,000 tons of Rounds, Squares, Hexagons, Angles & Flat bars every year which makes Aamor Inox the largest independent producer of cold finished bars in India.

Aamor Inox offers very high-quality "Improved Machining (IM)" stainless steel bright round bars. The key to improved machinability lies in the special melting process used by Aamor Inox; with a greater control upon non-metallic inclusion in the liquid metal. Aamor Inox's cold-finishing facilities include:

Bar-to-Bar Peeling Line

Fully-Automatic & combined Bar Peeling line
Fullly Integrated: Entire operations in a single line including an Pre-straightener, Peeling, Reeling, Grinding, Chamferring & Bundling
Size range 18mm upto 150mm finished dia in lengths upto 8.5 meters (28 foot)
Equipped with a very advanced high-precision cutter heads for achieving desired roundness, ovality and lobing in the peeled bars.
Peeling speeds upto 15 meters / minute
Equipped with advanced Laser size measurement system - from Zumbach, Switzerland
Equipped with an in-line Fully Automatic Double End Chamferring machine - from S.A.S, Italy
Supplied by EJP Machinen GmbH, Germany

Coil-to-Bar Drawing Line

Fully-Automatic combined Drawing line
Supplied by Schumag GmbH, Germany
Consists of Decoiler, Cold drawing unit, Reeling and in-line Shearing
Drawing speeds upto 5 meters / minute
Size range 4 mm upto 12.5 mm dia finished bars

Bar-to-Bar Drawing Lines

4 lines, suitable for cold drawing of Rounds, Hexagons, Squares & Flat Bars
Drawing speeds upto 3 meters / minute
Size range 12 mm upto 75 mm finished size

Angles & Flat Bars Finishing Lines

Descaling by shot blasting
Inline Straightening facilities
Pickling Baths & Water treatment setup
Surface grinding thru Belt Polishers

Centreless Grinding Machines

12 machines
Supplied by Cincinnati, USA & Schumag, Germany.
Suitable for Round Bars for close dimensional control of upto 50 microns
Uniform dimensions along the length
Controlled lobbing.

Crack Testing Machines

Fully-automatic Eddy-current testing (Circograph) by Dr Foerster, Germany - for detection of surface & subsurface flaws with 0.15 mm min detectability.
Ultrasonic Testing machines (for internal Quality Inspection) - for testing of Internal Soundness
MPI machines (for surface Quality Inspection) for detection of surface & subsurface flaws
XRF Handheld Spectrometers for grade identity / grade confirmation check.
Radiation Servo Meters for checking of radiation levels

Other Supporting Machines

Bar Straightness Testing
Surface Roughness Testing
Bars out-of-roundness testing Bar straightening press upto 140mm RCS
Band saw machines
Fully equipped Quality-Control laboratory for Mechanical, Chemical & Metallurgical testing