Select Language
Stainless Steel Bright Round Bars
Improved Machining Stainless Steels
Stainless Steel Smooth Turned Bars
Stainless Steel Hot Rolled Black Bars
Round Bars
Stainless Steel Piston Rod Quality Bars
Stainless Steel Pump Shaft Quality Bars (PSQ)
Stainless Steel Swiss Quality Bars
Precision & Accuracy Round Bars
Stainless Steel Hexagon (cold drawn)
Stainless Steel Squares (cold drawn)
Stainless Steel Flat Bars (cold drawn)
Cold Drawn Profiless
Stainless Steel Flat Bars (HRAP)
Stainless Steel Angles (HRAP)
Stainless Steel Wire Rods (HRAP)
HRAP Profiles & Wire Rods
- Home
- AS 9100-D Approved Mill
AS 9100 Approved Stainless Steel Mill
17-4 Stainless Steel Bar UNS S17400 (Grade 630)
17-4 stainless steel bar is one of the original precipitation hardened grades developed in the 50’s. Primarily comprised of 17% chromium, 4% nickel, 4% copper, with the balance being iron. Other characteristics include high strength, toughness, and quality mechanical properties at temperatures up to 600° F. Engineers and designers frequently choose Stainless Steel 17-4 PH due to its high strength and superior corrosion resistance when compared to many other stainless steels.
Aamor-Inox 17-4 material offers following benefits:
- High Tensile Strength and Toughness
- High Hardness upto 600? F (316?C)
- Excellent Corrosion Resistance.
Aamor-Inox’s produces 17-4 materials to meet the following specification: AMS 5643R, DIN/EN 10088-3, AMS 5622, ASTM A564
CHEMCIAL COMPOSITION (AVERAGE %)
| Grade | C (Max) | Si (Max) | Mn (Max) | Cr | Ni | CU | Bn + Ta | S (Max) | Ph (Max) | MO (Max)rade |
|---|---|---|---|---|---|---|---|---|---|---|
| 17-4 | 0.07 | 1.00 | 1.00 | 15.00-17.50 | 3.00-5.00 | 3.00-5.00 | 0.15 to 0.45 | 0.030 (0.025) | 0.040 (0.030) | - |
| 630 | 0.07 | 1.00 | 1.00 | 15.00-17.50 | 3.00-5.00 | 3.00-5.00 | 0.15 to 0.45 | 0.030 (0.025) | 0.040 (0.030) | - |
| 1.4542 | 0.07 | 0.70 | 1.50 | 15.00-17.50 | 3.00-5.00 | 3.00-5.00 | 5xC to 0.45 | 0.030 (0.025) | 0.040 (0.030) | 0.60 |
| 1.4548 | 0.07 | 1.00 | 1.00 | 15.00-17.50 | 3.00-5.00 | 3.00-5.00 | 0.15 to 0.45 | 0.025 | 0.025 | 0.60 |
* Ph upto 0.025% max can be achieved and supplied as per ASME 5622. PREN = (%Cr+3.3%Mo+16%N) > 17
MECHANICAL PROPERTIES
| Type | Standard | Tnsile Strenth(min) | Yield Stranth(min) | Elongation% (min) | Reduction (min) | Hardness | Empact Charpy-V (min) | ||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Rockwell C | Brinell | Foot/Lbs | Joules | ||||||||||
| KSI | MPA | KSI | MPA | Min | Max | Min | Max | ||||||
| Condition A | ASTM A564 | - | - | - | - | - | - | - | 38 | 363 | 363 | - | - |
| H900 | ASTM A564 | 190 | 1310 | 170 | 1170 | 10 | 40 | 40 | - | 388 | - | - | - |
| H925 | ASTM A564 | 170 | 1170 | 155 | 1070 | 10 | 44 | 38 | - | 375 | - | 5 | 6.8 |
| H1025 | ASTM A564 | 155 | 1070 | 145 | 1000 | 12 | 45 | 35 | - | 331 | - | 15 | 20 |
| H1075 | ASTM A564 | 145 | 1000 | 125 | 860 | 13 | 45 | 32 | - | 311 | - | 20 | 27 |
| H1100 | ASTM A564 | 140 | 965 | 115 | 795 | 14 | 15 | 31 | - | 302 | - | 25 | 34 |
| H1150 | ASTM A564 | 135 | 930 | 105 | 725 | 16 | 50 | 28 | - | 277 | - | 30 | 41 |
| H1150M | ASTM A564 | 115 | 795 | 75 | 520 | 18 | 55 | 24 | - | 255 | - | 55 | 75 |
| H1150D | ASTM A564 | 125 | 860 | 105 | 725 | 16 | 50 | 24 | - | 255 | 311 | 30 | 41 |
| Condition AT | EN 10088-3 | - | 1200 max | - | - | - | - | - | - | - | 360 | - | - |
| P800 | EN 10088-3 | - | 800-950 | - | 520 | 18 | - | - | - | - | - | - | 75 |
| P930 | EN 10088-3 | - | 930-1100 | - | 720 | 16 | - | - | - | - | - | - | 40 |
| P960 | EN 10088-3 | - | 960-1160 | - | 790 | 12 | - | - | - | - | - | - | - |
| P1070 | EN 10088-3 | - | 1070-1270 | - | 1000 | 10 | - | - | - | - | - | - | - |
Corrosion Resistance
- Material withstands corrosion better than any other standard hardenable stainless steels
- Stress corrosion cracking resistance is developed by age hardening at temperatures of 1025?F (552?C) and higher
- Aamor-Inox’s 17-4 material has good resistance to sulfide stress cracking at Rockwell C 33 maximum hardness as per NACE MR-01-75
Products Available in Grade 17-4ph
| Size Range | Size (diameter) | Size (diameter) | Size (diameter) | |
|---|---|---|---|---|
| mm | Inch | |||
| Bright Round Bars | 15 – 150 | 5/8”- 5-3/4” | h9, h11, K12, K13 | upto 24 feet / 7 meters |
| Pump Shaft Quality Bars | 15 – 100 | 5/8” to 4” | h6, h7, h8, h9 | upto 24 feet / 7 meters |
| Boat Shaft Quality Bars | 15 – 100 | 5/8” to 4” | h6, h7, h8, h9 | upto 24 feet / 7 meters |
| HRAP Flat Bars | 25x3 – 150x50mm | 5/8”, 7/8”, 1”, 1.1/4”, 1.1/2, 2”” | ASTM A484 (Table4) /EN 10059 | upto 24 feet / 7 meters |